RM2 - ARM 800MHz/1GHz
- ARM Cortex A8
- 800MHz or 1GHz Processor Speeds
- Texas Insruments C64+ Digital Signal processor 600 or 800 MHz
- Imagination Graphics 2D/3D Engine
- 256MB Low Power DDR memory
- 512MB SLC NAND Flash
- USB 2.0 ports
- 10/100 Ethernet LAN
- 16 bit General Purpose Bus for Expansion
- Power Management
- Digital Camera
- Audio
- General Purpose IO Lines
The RM2 is the first ARM based SOM product to be released. It is based on the latest ARM
Cortex A8 processor together with integrated Digital Signal Processor
(DSP) and 2D/3D Graphics Engine. with a choice of processor speeds of
800Mhz or 1GHz and DSP speeds of 660MHz and 800MHz the RM2 offers
exceptional performance with very low power consumption. All this in only 50mm by 50mm!!
The onboard functionality includes:
Processor – Texas Instruments OMAP37xx
Single ARM Cortex A8 processor 800MHz or 1GHz
NEON SIMD Coprocessor
TMS320C64x+ Digital Signal Processor (3730 only- 660MHz or 800MHz)
POWERVR SGX™ Graphics Accelerator (3730 only)
1.8V I/O voltage
MCBSP
SPI
USB
HDQ
UART
I2C
SD/MMC/SDIO
Camera Image Signal Processing
CCD and CMOS Imager Interface
System Direct Memory Access (SDMA) controller
LPDDR and asynchronous interface
Memory subsystem
256Mbytes or 512Mbytes mobile LPDDR memory, 400 MT/s
On-board 256Mbytes to 1Gbytes NAND Flash memory for code storage. Expandable on the carrier board.
Peripherals
Ethernet – SMSC LAN9221
10/100Mbit/sec interface
Companion Chip – Texas Instruments TPS65930
Processor core power DC/DC conversion
Audio Codec
USB Device interface
USB PHY – SMSC USB3320C
One USB 2.0 Host interface.
Temperature Ranges
Standard 0 to 70 degrees centigrade
Extended -30 to 85 degrees centigrade
Processor – Texas Instruments OMAP37xx
Single ARM Cortex A8 processor 800MHz or 1GHz
NEON SIMD Coprocessor
TMS320C64x+ Digital Signal Processor (3730 only- 660MHz or 800MHz)
POWERVR SGX™ Graphics Accelerator (3730 only)
1.8V I/O voltage
MCBSP
SPI
USB
HDQ
UART
I2C
SD/MMC/SDIO
Camera Image Signal Processing
CCD and CMOS Imager Interface
System Direct Memory Access (SDMA) controller
LPDDR and asynchronous interface
Memory subsystem
256Mbytes or 512Mbytes mobile LPDDR memory, 400 MT/s
On-board 256Mbytes to 1Gbytes NAND Flash memory for code storage. Expandable on the carrier board.
Peripherals
Ethernet – SMSC LAN9221
10/100Mbit/sec interface
Companion Chip – Texas Instruments TPS65930
Processor core power DC/DC conversion
Audio Codec
USB Device interface
USB PHY – SMSC USB3320C
One USB 2.0 Host interface.
Temperature Ranges
Standard 0 to 70 degrees centigrade
Extended -30 to 85 degrees centigrade
)
)
RE2 Single Board Computer
View Product
High-performance, ultra low power embedded single board computer with onboard DSP, hi resolution video playout and telematics module. Powered by a 600/720MHz ARM Cortex A8 core with 430/520MHz C64x DSP, board power dissipation is typically circa 3 watts at 720MHz. Optional extended temperature board available at -40°C to +85°C.
Designed to be used with the REsolution display kit, bringing together all the basic building blocks needed for a versatile embedded HMI module
View Product