RE SERIES ULTRA LOW POWER SBC RANGE
The RE series of embedded single board computers from Blue Chip Technology are the perfect fit for low-power, low-cost,small form factor devices. Our RE boards have a typical power dissemination of circa 2 watts, support advanced power management modes and are about the same footprint as a playing card. They pack in an impressive performance - the entry level RE1 embedded single board computer runs at 300MHz or 500MHz, a versatile embedded engine capable of driving colour TFT touchscreen interfaces up to 800 x 600 resolution. Whilst the higher performance RE2 incorporates a 600/720MHz ARM Cortex A8 CPU with 430/520MHz C64x DSP which can support 720p resolution video content. All of the key hardware features needed to provide a solid embedded platform are present - 512MB Flash memory, Serial Ports (3), 10/100Mbit Ethernet, Audio, Touch Screen controller, optional SD, USB Host Ports, USB Device Port and 12 general purpose I/Os. For telematics based applications, the RE2 embedded single board computer also supports Wi-fi, Bluetooth, full optional GPRS/GPS functionality, onboard accelerometer and extended temperature ranges. Applications can run on WIN CE 6.0 or Linux kernel operating systems with a covering Board Support Package (BSP) to speed up application development.
Both RE embedded single board computers can be bought standalone or as part of our REsolution display kit, which brings together all the basic building blocks needed for a versatile embedded HMI module. The resulting package is an integrated solution which is small and low power for fanless operation. You don’t have to manage the associated issues of integrating a display and embedded board – the mounting, cabling, signalling, power and connectors are all sorted out. The whole package is managed for long term availability and problem free fit, form and function upgrades.
High-performance, ultra low power embedded single board computer with onboard DSP, hi resolution video playout and telematics module. Powered by a 600/720MHz ARM Cortex A8 core with 430/520MHz C64x DSP, board power dissipation is typically circa 3 watts at 720MHz. Optional extended temperature board available at -40°C to +85°C.
Designed to be used with the REsolution display kit, bringing together all the basic building blocks needed for a versatile embedded HMI module
- Very low power RISC based processor - typical power profile of circa 2W
- 600/720MHz ARM Cortex A8 430/520MHz C64x DSP
- Neon Floating Point
- Power VR Graphics Engine
- Open GL ES 2.0 Support
- HD MPEG-4 Video Decoder
- Four USB 2.0 host ports
- One USB 2.0 device port
- Two RS232 and RS485 serial ports
- 12 off GPIO channels
- Camera port
- Audio
- Wi-fi and Bluetooth
- DVI and LCD interface
Entry level, ultra low power embedded single board computer. Board power dissipation starts at 1.5 watts at 333MHz and 2 watts at 500MHz making the RE1 low cost, single board computer an ideal candidate for low power embedded applications.
The RE low power SBC range is designed to be used with the REsolution display kit, bringing together all the basic building blocks needed for a versatile embedded HMI module.
- Low cost single board computer
- Very low power RISC based processor - typical power profile of under 1.5W
- Four USB host ports
- One USB device port
- Two RS232 and RS485 serial ports
- 12 off GPIO channels
- Supporting PB1 board available for easy display interfacing
- Single wide range voltage operation